Dell PowerEdge 2950 II
Last Updated:
The following Open Servers and Devices are certified by Check Point and are recommended for use with SecurePlatform
| Official web site | PowerEdge 2950 at Dell official site |
| Processor | Up to 2 Quad-Core Intel Xeon Processors 5400 series at up to 3.16GHz;; Up to two Quad-Core Intel Xeon 5300 sequence processors at up to 2.66GHz; Up to two Dual-Core Intel Xeon 5100 sequence processors at up to 3.0GHz; Up to two Dual-Core Intel Low Volt Xeon 5148 processor at 2.33GHz; Up to two Dual-Core Intel Xeon 5000 sequence processors at up to 3.0GHz |
| Memory | 256MB/512MB/1GB/2GB/4GB Fully Buffered DIMMs (FBD) in matched pairs; 533MHz or 667MHz; 8 sockets for support up to 32GB |
| Network Controller | Dual embedded Broadcom® NetXtreme II 5708 Gigabit3 Ethernet NIC |
| Additional Network Controller | IntelPRO/1000 PT Dual Port server adapter UTP copper PCIe x 4 |
| Mass Storage Device | PERC 5/i: SAS 3.0 Gb/s RAID controller |
| Certified RAID Mode | 1 |
 |
|
- The mass storage device PERC 6 is not supported with this server.