HP ProLiant DL 580 G4
Last Updated:
The following Open Servers and Devices are certified by Check Point and are recommended for use with SecurePlatform
| Remarks | HP servers are compatible with HP network adapters only. Among HP network adapters, the NC364T (that based on Intel PT Quad) network server adapter is not compatible with this open servers prior to SecurePlatform 2.6 for NGX R65. |
| Official web site | HP DL 580 G4 official site |
| Processor | 64-bit Dual-Core Intel® Xeon® Processor 7140M (3.40 GHz, 16M L3 Cache, 800 MHz FSB) 64-bit Dual-Core Intel® Xeon® Processor 7130M (3.20 GHz, 8M L3 Cache, 800 MHz FSB) 64-bit Dual-Core Intel® Xeon® Processor 7120M (3.00 GHz, 4M L3 Cache, 800 MHz FSB) 64-bit Dual-Core Intel® Xeon® Processor 7110M (2.60 GHz, 4M L3 Cache, 800 MHz FSB) 64-bit Dual-Core Intel® Xeon® Processor 7041 (3.00 GHz, 2x2M L2 Cache, 800 MHz FSB) 64-bit Dual-Core Intel® Xeon® Processor 7030 (2.80 GHz, 2x1M L2 Cache, 800 MHz FSB) |
| Memory | PC2-3200 Registered Memory (DDR2-400) can be configured in Hot Plug Mirrored, Hot Plug RAID, Online Spare or Advanced ECC modes |
| Network Controller | Two embedded NC371i Multifunction Gigabit Network Adapters, including support for Accelerated iSCSI through an optional Licensing Kit |
| Additional Network Controller | HP NC360T |
| Mass Storage Device | HP Smart Array P400/256MB Controller (optional 512MB battery backed write cache) |
| Certified RAID Mode | 0 , 1 , 5 |
 |
|