Dell PowerEdge 2950 III
Last Updated:
The following Open Servers and Devices are certified by Check Point and are recommended for use with SecurePlatform
| Official web site | Dell PowerEdge 2950 III official site |
| Processor | Intel® Xeon® processors Up to 2 Quad-Core Intel Xeon Processors 5400 series at up to 3.16GHz Up to 2 Quad-Core Intel Xeon Processors 5300 series at up to 3.0GHz Up to 2 Quad-Core Intel Low Volt Xeon Processors L5300 series at up to 2.0 GHz Up to 2 Dual-Core Intel Xeon Processors 5200 series at up to 3.0GHz (when available) Up to 2 Dual-Core Intel Xeon Processors 5100 series at up to 3.0GHz Up to 2 Dual-Core Intel Low Volt Xeon Processors 5148 at 2.33GHz |
| Memory | 8 DIMM slots ; Minimum: two 512MB DIMMs for a total of 1GB4 of RAM ; Maximum: eight 4GB4 DIMMs for a total of 32GB4 of RAM ; Supports 512MB Single Rank and 1GB4, 2GB4 and 4GB4 667 MHz Dual Rank DIMMs ; Error Checking and Correction (ECC) and Single Device Data Correction (SDDC) technologies maintain system data integrity and help prevent single bit or multi bit errors on DIMMs. ; Spare Bank support for enhanced data protection in the event of a DRAM chip failure. Requires 8 DIMMs populated to function. |
| Network Controller | Dual embedded Broadcom® NetXtreme IITM 5708 Gigabit6 Ethernet NIC |
| Additional Network Controller | Intel PRO/1000 PT Dual Port Server Adapter, Gigabit, Copper, PCI-E x4 |
| Mass Storage Device | Integrated PERC 6/i integrated daughtercard (optional): SAS 3.0 Gb/s RAID controller with Intel IOP333 processor and 256MB cache |
| Certified RAID Mode | 0 , 1 |
 |
|