|
|
|
|
|
You set the time displayed in the Safe@Office Portal during initial appliance setup. If desired, you can change the date and time using the procedure below.
|
|
|
To set the time
The Tools page appears.
The Safe@Office Set Time Wizard opens displaying the Set the Safe@Office Time dialog box.
The following things happen in the order below:
Set the date, time, and time zone in the fields provided, then click Next.
Complete the fields using the information in Time Servers Fields, then click Next.
|
|
|
Set Time Wizard Fields
Select this option… |
To do the following… |
|---|---|
Your computer's clock |
Set the appliance time to your computer's system time. Your computer's system time is displayed to the right of this option. |
Keep the current setting |
Do not change the appliance's time. The current appliance time is displayed to the right of this option. |
Use a Time Server |
Synchronize the appliance time with a Network Time Protocol (NTP) server. |
Specify date and time |
Set the appliance to a specific date and time. |
|
|
|
Time Servers Fields
In this field… |
Do this… |
|---|---|
Primary Server |
Type the IP address of the Primary NTP server. |
Secondary Server |
Type the IP address of the Secondary NTP server. This field is optional. |
Clear |
Clear the field. |
Select your time zone |
Select the time zone in which you are located. |