Wall Mounting the Safe@Office Appliance

Linked Diagram Template

For your convenience, the Safe@Office appliance includes a wall mounting kit, which consists of two plastic conical anchors and two cross-head screws.

To mount the Safe@Office appliance on the wall

Decide where you want to mount your Safe@Office appliance.
Decide on the mounting orientation.
You can mount the appliance on the wall facing up, down, left, or right.

Note: Mounting the appliance with the ports facing upwards is not recommended, as dust might accumulate in unused ports.

Mark two drill holes on the wall, in accordance with the following sketch:
Drill two 3.5 mm diameter holes, approximately 25 mm deep.
Insert two plastic conical anchors into the holes.

Note: The conical anchors you received with your Safe@Office appliance are suitable for concrete walls. If you want to mount the appliance on a plaster wall, you must use anchors that are suitable for plaster walls.

Insert the two screws you received with your Safe@Office appliance into the plastic conical anchors, and turn them until they protrude approximately 5 mm from the wall.
Align the holes on the Safe@Office appliance's underside with the screws on the wall, then push the appliance in and down.
Your Safe@Office appliance is wall mounted. You can now connect it to your computer.