To set up a network printer
See Connecting the Appliance to Network Printers.
The Ports page appears.
The USB Devices page appears. If the UTM-1 appliance detected the printer, the printer is listed on the page.
If the printer is not listed, check that you connected the printer correctly, then click Refresh to refresh the page.
The Printer Setup page appears.
The port number appears in the Printer Server TCP Port field. You will need this number later, when configuring computers to use the network printer.
Note: Printer port numbers may not overlap, and must be high ports.
You may want to change the port number if, for example, the printer you are setting up is intended to replace another printer. In this case, you should change the replacement printer's port number to the old printer's port number, and you can skip the next step.
See Configuring Computers to Use Network Printers.