Previous Topic

Next Topic

Book Contents

Book Index

Configuring the LAN Network

ProductBar EMPTYLinked Diagram TemplateLinked Diagram TemplateLinked Diagram TemplateLinked Diagram TemplateProductBar EMPTY

To configure the LAN network

  1. Click Network in the main menu, and click the My Network tab.

    The My Network page appears.

  2. Click Edit in the LAN network’s row.

    The Edit Network Settings page for the LAN network appears.

  3. In the Mode drop-down list, select Enabled.

    The fields are enabled.

  4. If desired, change your UTM-1 appliance’s internal IP address.

    See Changing IP Addresses.

  5. If desired, enable or disable Hide NAT.

    See Enabling/Disabling Hide NAT.

  6. If desired, configure a DHCP server.

    See Configuring a DHCP Server.

  7. Click Apply.

    A warning message appears.

  8. Click OK.

    A success message appears.

See Also

Configuring Network Settings

Changing IP Addresses

Enabling/Disabling Hide NAT

Configuring a DHCP Server

Configuring a DMZ Network

Configuring the OfficeMode Network

Configuring VLANs