Previous Topic

Next Topic

Book Contents

Book Index

Restoring the Appliance Configuration from a USB Flash Drive

Linked Diagram TemplateProductBar EMPTY

To restore the appliance configuration from a USB flash drive

  1. Connect a USB flash drive to one of your UTM-1 appliance's USB ports.

    For information on locating the USB ports, see Introduction.

  2. Click Setup in the main menu, and click the Tools tab.

    The Tools page appears.

  3. Click Backup/Restore.

    The Backup/Restore Wizard opens displaying the Step 1: Select Action dialog box.

  4. Click Restore this gateway from a storage device.
  5. Click Next.

    The UTM-1 appliance is restored from the <MACAddress> folder on the USB flash drive, where <MACAddress> is the appliance's MAC address. This may take some time.

    The Step 2: Restore Complete screen appears displaying the configuration file's content and the result of implementing each configuration command.

Note: If the appliance's IP address changed as a result of the configuration import, your computer may be disconnected from the network; therefore you may not be able to see the results.
  1. Click Finish.

See Also

Restoring the Appliance Configuration

Importing the Appliance Configuration from Your Computer