You can view a list of currently established VPN tunnels.
To view VPN tunnels
The VPN Tunnels page appears with a table of open VPN tunnels.
The VPN Tunnels page includes the information described in the following table.
VPN Tunnels Page Fields
This field… |
Displays… |
|---|---|
Type |
The currently active security protocol (IPSEC). |
Source
|
The IP address or address range of the entity from which the tunnel originates. The entity's type is indicated by an icon. See VPN Tunnel Icons. |
Destination |
The IP address or address range of the entity to which the tunnel is connected. The entity's type is indicated by an icon. See VPN Tunnel Icons. |
Security |
The type of encryption used to secure the connection, and the type of Message Authentication Code (MAC) used to verify the integrity of the message. This information is presented in the following format: Encryption type/Authentication type. In addition, if IPSec compression is enabled for the tunnel, this field displays the Note: All VPN settings are automatically negotiated between the two sites. The encryption and authentication schemes used for the connection are the strongest of those used at the two sites. Your ZoneAlarm router supports AES, 3DES, and DES encryption schemes, and MD5 and SHA authentication schemes. |
Established |
The time at which the tunnel was established. This information is presented in the format hh:mm:ss, where: hh=hours mm=minutes ss=seconds |
VPN Tunnels Icons
This icon… |
Represents… |
|---|---|
|
This gateway |
|
A network for which an IKE Phase-2 tunnel was negotiated |
|
A remote access VPN user |