Previous Topic

Next Topic

Book Contents

Book Index

Backing Up and Restoring the UTM-1 Appliance Configuration

ProductBar EMPTYLinked Diagram TemplateLinked Diagram TemplateLinked Diagram TemplateLinked Diagram TemplateProductBar EMPTY

The UTM-1 appliance provides the following ways of backing up and restoring its configuration:

In This Section

Backing Up the Appliance Configuration

Restoring the Appliance Configuration

See Also


Viewing Firmware Status

Upgrading Your License

Configuring a Gateway Hostname

Configuring Syslog Logging

Configuring HTTPS

Configuring SNMP

Setting the Time on the Appliance

Using Diagnostic Tools

Using Rapid Deployment

Resetting the UTM-1 Appliance to Defaults

Running Diagnostics

Rebooting the UTM-1 Appliance

Previous Topic

Next Topic

This method requires a USB port on your appliance.

Note: In both cases, the configuration file is saved as a textual CLI script. If desired, you can edit the file. For a full explanation of the CLI script format and the supported CLI commands, see the Embedded NGX CLI Reference Guide.